PRODUCT CATEGORY
Carbon Steel Fittings
Carbon steel pipe fittings — seamless butt-weld elbows, tees, reducers and caps to ASME B16.9 / EN 10253-2, plus fabricated mitered elbows, welded tees and welded reducers engineered to ASME B31.3 / EN 13480 and AWWA C208 for large-bore lines up to 140" (DN3550).
1/2"–24" (DN15–DN600)Seamless range12"–140" (DN300–DN3550)Fabricated rangeSeamless: ASME B16.9 / EN 10253-2 · Fabricated: ASME B31.3 / EN 13480Standards
Seamless to 24" - fabricated to 140"
/01
Fitting Types
Seamless Fittings
01
Pipe Elbows
Direction-change fitting — 45° / 90° / 180°, long or short radius.Size range1/2"–24" (DN15–DN600)
StandardASME B16.9 / EN 10253-2 (formerly DIN 2605)
Angle45° / 90° / 180°
Full product page →Datasheet
02Equal Tees
Branch fitting for 90° take-offs — run and branch the same size.Size range1"–24" (DN25–DN600)
StandardASME B16.9 / EN 10253-2 (formerly DIN 2615)
ConfigurationRun = branch (equal)
Full product page →Datasheet
03Reducing Tees
Tee with a reduced-bore branch for smaller take-offs.Run size1"–24" (DN25–DN600)
StandardASME B16.9 / EN 10253-2 (formerly DIN 2615)
ConfigurationRun × reduced branch
Full product page →Datasheet
04Concentric Reducers
Diameter change on a shared centreline.Size range1"–24" (DN25–DN600)
StandardASME B16.9 / EN 10253-2 (formerly DIN 2616)
GeometryConcentric — shared axis
Full product page →Datasheet
05Eccentric Reducers
Diameter change with one flat side — keeps lines drainable.Size range1"–24" (DN25–DN600)
StandardASME B16.9 / EN 10253-2 (formerly DIN 2616)
GeometryEccentric — flat side, offset axis
Full product page →Datasheet
06Pipe Caps
Domed end fitting that permanently closes a pipe run.Size range1/2"–24" (DN15–DN600)
StandardASME B16.9 / EN 10253-2 (formerly DIN 2617)
FormDomed end
Full product page →Datasheet
Welded Fittings
07
Mitered Elbows
Segment-welded large-bore elbows, any angle to order.Size range12"–100" (DN300–DN2500)
Design standardMiter design to ASME B31.3 / EN 13480-3
Angle / radiusAny angle · 1.5D–10D
Full product page →Datasheet
08Welded Tees
Fabricated large-bore tees — straight, reducing and lateral.Size range20"–140" (DN500–DN3550)
Design standardBranch reinforcement to ASME B31.3 · dimensions to AWWA C208
WallTo suit matching pipe schedule; min per ASME B31.3 / EN 13480-3
Full product page →Datasheet
09Welded Reducers
Fabricated large-bore reducers — concentric and eccentric.Size range20"–100" (DN500–DN2500)
Design standardFabricated to AWWA C208 / project specification
WallTo suit matching pipe schedule; min per ASME B31.3 / EN 13480-3
Full product page →Datasheet
/02
Where Our Fittings Are Used
Water & Wastewater
Transmission, distribution and treatment networks
Oil, Gas & Petrochemical
Process lines, refineries and tank farms
Power & HVAC
Steam, cooling and utility piping
Process & Industrial
Chemical, food and general plant piping
/03
Request a Quote
Need a specific fitting spec?
Send us size, schedule, type and material and our team will respond with pricing and lead time.
Prefer direct contact?
+90 535 269 02 92WhatsApp — fastest response+90 535 269 02 92Mon–Fri 9:00–18:00[email protected]Send drawings and BOQs directly ISO 9001:2015 certified quality
Send your requirementOur team responds within one business day.
Carbon Steel Fittings. One standard of supply.
Every order is checked, documented and delivered per specification — from our works in Istanbul to projects in 50+ countries.